Bay Converter SABRENT 3.5-Inch to SSD

Bay Converter SABRENT 3.5-Inch to SSD

Bay Converter SABRENT 3.5-Inch to SSD

SABRENT 3.5-Inch to SSD / 2.5-Inch HDD Bay Drive Converter (BK-HDDF)

• Supports any computer cases with an available 3.5" drive bay (both screw-on type or tool-less type)
• Converts an available 3.5" HDD bay drive to accommodate two 2.5" HDD or Solid State Drive
• Constructed from robust SECC steel to ensure maximum structural integrity

 

GO TO STORE

Bay Converter SABRENT 3.5-Inch to SSD

Icy Dock EZConvert 2.5-Inch to 3.5-Inch SATA SSD

Icy Dock EZConvert 2.5-Inch to 3.5-Inch SATA SSD

Icy Dock EZConvert 2.5-Inch to 3.5-Inch SATA SSD

Bay Converter Icy Dock EZConvert 2.5-Inch to 3.5-Inch SATA SSD / Hard Drive Converter

I installed a Corsair P128 SSD into the Icy Dock and mounted the Icy Dock onto one of my Mac Pro's internal drive sleds. The sled-mounted Icy Dock slid right into the Mac's SATA connectors, and I was good to go.

Installing the SSD into the Icy Dock is a tool-less affair. An ingenious, rotating "flap" clamps onto the back of the SSD when the top cover of the Icy Dock is slid on; therefore, the SSD is held securely onto the Icy Dock's internal SATA connectors. The outside of the Icy Dock has all of the mounting holes expected for a normal 3.5'' hard drive, so the Icy Dock is interchangeable with all standard 3.5'' drives. Four mounting screws are even included. (These screws were not needed for mounting the Icy Dock onto a Mac Pro drive sled.)

SEE MORE DETAIL
Icy Dock EZConvert 2.5-Inch to 3.5-Inch SATA SSD

Silverstone Tek 5.25-Inch to 3.5-Inch Drive Bay Converter Bracket (SDP10B)

Silverstone Tek 5.25-Inch to 3.5-Inch Drive Bay Converter Bracket (SDP10B)

Silverstone Tek 5.25-Inch to 3.5-Inch Drive Bay Converter Bracket (SDP10B)

used this bracket for my latest build where I used the following case, the Fractal Design Define R4 Cases, Black Pearl (FD-CA-DEF-R4-BL). This bracket fits my needs perfectly. I have three SSDs in my system and rather than use up drive trays and block airflow coming into the case, this bracket stores them up and out of the way.

The bracket itself feels well made. It comes with all the various types of screws you need to mount your drives and the black color fits in perfectly with the black paint they used on my Fractal Design case.

It is very flexible, you can use it to mount two 2.5" drives and one 3.5" drive at the same time. I simply used the 3.5" adapter that came with one of my SSDs to make it so the bracket could hold three 2.5" drives.
Silverstone Tek 5.25-Inch to 3.5-Inch Drive Bay Converter Bracket (SDP10B)